AutoCenter

Enables automatic centering of the component within its boundary. Default is 1 - Yes. If set to 0 - No, the component is aligned left in the boundary. OffsetX and OffsetY can be used to move the placement of the component in the boundary.

AutoFrameRate

Specifies whether the object controls its update rate. Default is 0 - No. When set to 1 - Yes, the object is repainted at the rate specified by the UpdateFrameRate property.

AutoScaleDesiredTicks

Specifies the desired TickMajorCount when AutoScaleEnabled is set to 1 - Yes. Default is 5. Due to the algorithm used to calculate the tick counts, the actual count may vary.

AutoScaleEnabled

Enables auto scaling of the indicator. Default is 0 - No.

AutoScaleMaxTicks

Specifies the maximum TickMajorCount when AutoScaleEnabled is set to 1 - Yes. Due to the algorithm used to calculate the tick counts, the actual count may vary. Default is 6.

AutoScaleStyle

Specifies the style of adjustment for the PositionMin and PositionMax when AutoScaleEnabled is set to 1 - Yes. When set to 0 - iassAutoMinMax, PositionMin and PositionMax are adjusted so that the scale starts and stops on a major tick.

BackGroundColor

Specifies the color of the object background. Default is gray (RGB 236.233.216). The background color is not shown if the Transparent property is set to 1 — Yes.

BackGroundPicture

Specifies the name of a picture file to show on the background of the object. Default is blank.

BorderStyle

Specifies the border style of the object. Default is 0 - ibsNone. Other options are 1 - ibsRaised and 2 - ibsLowered.

CachedDrawing

Enables optimizing the display of the object. Default is 1 - Yes.

CurrentMax

Specifies the maximum value reached by the Position property. It is reset each time the Position value is greater than the CurrentMax value. The only way to access the value is programmatically (i.e., using script).

CurrentMin

Specifies the minimum value reached by the Position property. It is reset each time the Position value is less than the CurrentMin value. The only way to access the value is programmatically (i.e., using script).

Enabled

Enables user interaction with the object. If set to 0 - No, the object is still shown but its context menu is disabled. Default is 1 - Yes.

EndsMargin

Specifies the margin (in pixels) between the indicator ends and the object boundary. Default is 10.

Height

Specifies the height (in pixels) of the object.

IndicatorBackGroundColor

Specifies the background color of the indicator. Default is dark red (RGB 128.0.0).

IndicatorBulbSize

Specifies the size (in pixels) of the indicator bulb. Default is 6.

IndicatorColor

Specifies the color of the indicator. Default is red (RGB 255.0.0).

IndicatorFillReferenceStyle

Specifies the style of drawing of the thermometer fill line starting from either the min scale, max scale, or a specified point. Default is 0 - ipfrsMin. Other options ipfrsMax, and ipfrsValue.

IndicatorFillReferenceValue

Specifies the position on the scale where the indicator fill starts. Use with IndicatorFillReferenceStyle when set to ipfrsValue.

IndicatorStyle

Specifies the appearance of the fill indicator. Default is 0 - itisBulb. Other options are 1 - itisBar, 2 - itisSunken, and 3 - itisRaised.

IndicatorWidth

Specifies the width (in pixels) of the fill indicator. Default is 2.

MaxPointerColor

Specifies the color of the max pointer. Default is cyan (RGB 0.255.255).

MinMaxFixed

Enables the Min and Max pointers to be fixed or track the range of the Position property. Default is 0 - No.

MinMaxPointerMargin

Specifies the margin (in pixels) between the Min and Max pointers and the indicator. Default is 5.

MinMaxPointerSize

Specifies the size (in pixels) of the pointers. Default is 8.

MinMaxUserCanMove

Enables a user to move the Min and Max pointers in Run mode. Default is 1 - Yes.

MinPointerColor

Specifies the color of the Min pointer. Default is yellow (RGB 255.255.0).

OffsetX

Specifies the offset of the indicator from the object’s x-axis. Default is 0.

OffsetY

Specifies the offset of the indicator from the object’s y-axis. Default is 0.

OptionSaveAllProperties

Enables the SaveAllPropertiesToFile method to save just the ActiveX Properties or all object properties. Default is 0 - No, which means that only ActiveX Properties are saved.

Orientation

Specifies the orientation of the indicator. The default is 0-ioVertical.

OrientationTickMarks

Specifies the location of the tick marks in relation to the indicator. If the object orientation is vertical, the option is the left or right side. If it is horizontal, the option is top or bottom. Default is 1 - iosTopLeft.

Position

Specifies the indicator level. Default is 0. If the object is associated with a point, the point’s value sets the fill level. If PositionPercent is specified, this value is calculated. If this value is specified, PositionPercent is calculated.

PositionMax

Specifies the upper limit of the indicator level. Default is 100.

PositionMin

Specifies the lower limit of the indicator level. Default is 0.

PositionPercent

Specifies the level of the indicator in terms of percent in regards to the range (PositionMax and PositionMin). If Position is specified, this value is calculated. If this value is specified, Position is calculated. Default is 0. Valid range is 0.00 (0%) and 1.00 (100%).

PrecisionStyle

Specifies if the labels will show precision as significant digits (integers) or with decimal places. Default is 1 - ipsFixedDecimal Points, which enables the labels to show the number of decimal places specified by the TickLabelPrecision property.

ReverseScale

Enables reversing the scale. Normal scaling runs negative to positive, left to right, or bottom to top. Default is 0 - No.

ShowMaxPointer

Enables display of the Max Pointer. Default is 0 - No.

ShowMinPointer

Enables display of the Min Pointer. Default is 0 - No.

ShowTickLabels

Enables display of the tick mark labels. Default is 1 - Yes.

ShowTicksMajor

Enables display of the major tick marks. Default is 1 - Yes.

ShowTicksMajorFirstLast

Enables display of the first and last major tick marks. Default is 1 - Yes.

ShowTicksMinor

Enables display of the minor tick marks. Default is 1 - Yes.

TickLabelFont

Specifies the font for the tick labels. Default is MS Sans Serif (8 point).

TickLabelFontColor

Specifies the color of the tick mark labels. Default is black (RGB 0.0.0).

TickLabelMargin

Specifies the margin (in pixels) between the labels and major tick marks. Default is 5.

TickLabelPrecision

Specifies the number of decimal places for the labels. Default is 0. To use any value other than 0, TickLabelPrecison must be set to 1 - ipsFixedDecimal Points.

TickMajorColor

Specifies the color of the major tick marks. Default is black (RGB 0.0.0).

TickMajorCount

Specifies the number of major tick marks displayed on the scale span. Default is 5.

TickMajorLength

Specifies the length (in pixels) of the major tick marks. Default is 10.

TickMajorStyle

Specifies the style of the major tick marks. Default is 2 - ibsLowered. Other options are 0 - ibsNone and 1 - ibsRaised.

TickMargin

Specifies the size of the margin (in pixels) between the indicator and the tick marks. Default is 8.

TickMinorAlignment

Specifies the alignment of the minor tick marks in relation to the major tick marks. Default is 0 - itmnaInside. Other options are 1 - itmnaCenter and 2 - itmnaOutside.

TickMinorColor

Specifies the color of the minor tick marks. Default is black (RGB 0.0.0).

TickMinorCount

Specifies the number of minor tick marks displayed between major tick marks. Default is 4.

TickMinorLength

Specifies the length (in pixels) of the minor tick marks. Default is 6.

TickMinorStyle

Specifies the style of the minor tick marks. Default is 2 - ibsLowered. Other options are 0 - ibsNone and 1 - ibsRaised.

Transparent

Enables transparency of the object background. Default is 0 - No.

UpdateFrameRate

Specifies the rate (in seconds) of repainting the object. Default is 60. Applicable only when AutoFrameRate is set to 1 - Yes.

Visible

Enables the visibility of the object on TheView. Default is 1 - Yes.

Width

Specifies the width (in pixels) of the object.